Challenge In anticipation of an increase in benzene emissions regulation, a Canadian facility wanted to proactively reduce their outputs for benzene loading operations. Normally, this facility would load both barges and railcars with liquid benzene for shipment to their customers. They would need to implement a vapor control system that could seamlessly integrate with […]
Challenge A Canada Refinery required the stripping and cleaning of a butane storage vessel as part of a facility transition to renewable diesel service. Envent was assigned the responsibility of degassing the tank and delivering continuous vapor control to minimize tank atmosphere to non-explosive levels. Furthermore, the tank needed to be inerted to prevent oxygen […]
Challenge: A refinery faced significant challenges with high benzene emissions from its wastewater, exceeding the Benzene Waste Operations NESHAP (BWON) requirements. Crude desalter process water, typically directed to the refinery’s Wastewater Treatment Unit (WWTU), contained high levels of dissolved benzene and phenols. These contaminants were not fully removed during primary treatment, leading to their release […]
Challenge The customer needed to clear their hydrotreater of volatile vapors and product in order to allow manned entry for maintenance activities. During this process, there would be limited availability to use the flare or FGRU to purge vapors from the unit. Additionally, there were high concentrations of hydrogen gas and H2S that needed to […]
Challenge The challenge of this project is to provide supplemental soil vapor extraction (SVE) and vapor control to the plants existing vapor recovery system. Additional soil vapor extraction wells were installed on the periphery of the plant due to the expansion of the landfill. The plants SVE blowers are unable to provide sufficient vacuum and […]
Challenge There was a large plume of MTBE below grade near a waterway strait. Envent had been collecting ground water and treating it from this site for approximately 10 years but due to multiple years of drought ground water was no longer mobilizing large concentrations of MTBE for removal. Solution Envent was asked to provide […]
Challenge A customer removed 50′ of 60″ ducting which contained NOx. The facility is located next to a major highway and bridge in the California Bay Area. Envent provided vapor control on the NOx so it did not produce a toxic orange cloud over the heavily populated area while the customer was removing the ducting. […]
Challenge A gulf coast refinery was recently the target of a large hurricane: a storm that caused them significant damages. It was at this point, the refinery decided to change their model from a refinery into a storage terminal facility. During this process, the facility found value in selling their current product via marine vessels. […]
Challenge A customer of ours has two cargo ships that constantly transfer cargo up and down the west coast. These ships are always sailing back or forth with commerce and are on extremely tight schedules. Envent Corporation was challenged with assisting in the commissioning a new LNG fuel system on one of these cargo ships, […]
Challenge A customer in the Midwest needed to reduce noise coming from a natural gas pipeline blowdown. Pipeline blowdown operations can be very loud have the potential to disrupt the immediate area. The gaseous contents of the pipeline are at high pressure and when that pressure is under controlled release, creates an unpleasant rushing sound. ENVENT was called upon to assist […]
Challenge Envent provided vapor control on 5 temporary frac tanks during a tank cleaning. The source tank was emptied of a slop oil mixture. The product was going to be separated by a centrifuge into water, oil, and solid components. The temporary tanks in use accepted water/oil outputs and contained a heavy oil/sludge input […]
We believe Safety is No Accident.
